This is VNICE 112.8kWh Distributed ESS Cabinet Energy Storage Systems. Which can provide reliable power for several types of equipment and systems. Come with the function of peak shaving.
| Item | Values |
Cell Parameter | |
| Cell type | Lithium iron phosphate |
| Single-cell cycle life | 3.2V280Ah EOL70% 8000 Time cycle life at (25℃ DOD90% 0.5P/0.5P) |
| Configuration | 1P126S |
| Rated voltage | 403.2V |
| Voltage range | 315V-459.9V |
| Nominal energy of the battery system | 112.8kWh |
| AC Parameter | |
| Wiring mode | three-phase four-wire |
| AC power | 50kVA |
| Load power | 55kVA |
| Grid voltage | 380/400（-15%~15%）Vac |
| Grid?frequency | 50/60（-2.5~2.5）Hz |
| Total current harmonic distortion rate | ≤3% |
| Three-phase unbalanced support rate | 100% |
PV Parameter | |
| PV?maximum voltage | 900Vdc |
| PV MPPT voltage range | 520~800Vdc |
System parameter | |
| Maximum conversion efficiency | ≥90% |
| Dimensions | W1700×D1050×H2360mm |
| Weight | 1.7T |
| Noise | ＜75dB |
| IP lever | IP54 |
| Ambient temperature | -20~60℃ |
| Relative humidity | 0~95% |
| Altitude | 3000M |
| Communication | RS 485, Ethernet, CAN |
| Protocol | Modbus TCP/RTU, IEC104 |
| Optional function | STS module, EMS |
| Region | Certificate |
| General | EN 62109-1:2010 |
| General | EN 62109-2:2011（CE） |
| General | EN IEC 61000-6-2:2019 |
| General | ENIEC 61000-6-4:2019（EMC） |
| General | B5 EN 62109-1:2010 |
| Australia | A5/NZ5 4777.2:2020, Amd:1:2021 |
| Austria | OVE-Richtlinie R 25:2020 |
| France | DIN VDE 0126-1-1:2013( with nationaldeviation of France: DIN VDE 0126-1-1 6R 20191 |
| Germany | VDE-AR-N 4105:2018 |
| Netherland | EN 50549-1:2019+AC:2019-04 |
| South Africa | NRS 097-2-1:2017 Edition 2.1 |
| Thailand | PEA、MEA |
| United Kingdom | B5 EN 62109-2:2011 |
